[RPO] Electrical, Instrument, Mechanical Engineer/ Designer

Địa điểm Thành Phố Vũng Tàu
Ngành nghề Năng lượng, dầu khí khai khoáng
Category Engineer
Mã số RPO20
Loại công việc Theo hợp đồng
Lương Negotiable
Email liên hệ tien.nguyencam@manpower.com.vn
Điện thoại liên hệ 0775 825 895
Ngày đăng Tháng hai 06, 2024

Manpower is looking for talents working for a Oil & Gas Project in Vung Tau for these positions below:

ELECTRICAL DISCIPLINE

Senior Electrical Engineer:​

- Having from 5 years experience in relevant positions

- Must have experience about electrical system in Oil & Gas industrial.

- Develop design work, specification, requisition and ensure that all related deliverables are in compliance with the applicable codes, standards.

- Solid understanding of common electrical systems drawings, documentation and package (TBC/TBE/VDR), such as E-House, Gas Turbine Generator, Diesel Enginer Generator, HV/LV Switchgear/MCC, UPS system, Distribution Board, Navigational Aids system, E&I Equipment Layout, Single Line Diagram, Schematic Diagram, Block/Wiring Diagram, Electrical Layout, P&IDs, lighting plans, specification & datasheets, etc.

- Reviewing/Checking all Electrical drawings and document. Ensuring engineering, design quality, and technical accuracy of drawings, 2D/3D models, Material quantities, requisition, specification, calculations, and procedure.

- Ensure that design integrity is maintained through fabrication through correct handling of site queries and proper application of QA/QC processes.

- Ability to perform detailed design calculations, using appropriate software (ETAP) would be a plus.

Electrical Engineer:​

- Having from 3 years experience in relevant positions

- Must have experience about electrical system in Oil & Gas industrial / Offshore Substation.

- Develop design work, specification, requisition and ensure that all related deliverables are in compliance with the applicable codes, standards.

- Solid understanding of common electrical systems drawings, documentation and package (TBC/TBE/VDR), such as Bulk Materials (Lighting, Cable, Gland, Ladder/Tray, JB, SO, LCS, Steel Suppport, Earthing, Misc.), Electrical Layout (Lighting, Cable Routing, Ladder/Tray, MCT), Load List, Cable Schedule, Ex. Register, specification & datasheet, etc.

- Ability to perform detailed design calculations as Lighting, Cable sizing, UPS sizing, Main equipment sizing, using appropriate software (ETAP) or DIALUX would be a plus.

Senior Electrical Designer:​

- Having from 5 years experience in relevant positions

- Management and development of electrical drawings detailing the layout and installation of the electrical supporting infrastructure for the project, cable schedules and bulk material requisitions to support the project.

- Application of Industry standard CAD systems (AutoCAD / MicroStation) for the production of 2-D electrical drawings and 3-D modelling systems, such as PDS, PDMS or SP3D.

- Managing the development and checking of common electrical design drawings and deliverables including General Electrical Equipment Layouts including E&I Equipment Layouts, Lighting Layouts, Earthing Layouts, Lightning Layouts, Cable Routing, Cable Schedule, Electrical MTO, Schedule/JB termination/lighting & small power/ladder/tray, typical installation detail, support & Shop drawings, etc."

Electrical Designer:​

- Having from 3 years experience in relevant positions

- Independently work CAD platform for the 2D design and detail engineering of electrical system in Oil & Gas Industrial / Offshore Substation.

- Typical work scope for the Electrical design group includes: block & wiring diagrams, Layout/Schedule/JB termination/lighting & small power/ladder/tray, typical installation detail, support & Shop drawings, etc.

- Knowledge of Electrical Bulk materials to carry out design activities within an area of a project and ensure that the technical and safety integrity of the design is maintained and that the Company and Project procedures are adhered to.

- Ability to perform PDMS/E3D and DIALUX (Lighting) software would be a plus.

Senior Instrument Engineer:​

- Having from 5 years experience in relevant positions

- Must be Senior Instrument Engineer in Engineering Company in at least 2 successful projects in FEED/Detailed Design for Offshore Oil &Gas Platform.

Experience in preparing engineering design, specification, datasheet procument support and/or recommendations for variety of the following:

- Field Instrumentations, analyzers, metering system, HIPPS, etc…

- DCS, ESD, F&G Systems etc.

- PA/GA, Telecoms, Radio Systems, and Data Communication network

- Participant in SIL study workshop, HAZOP/HAZID workshop, etc…

- Hazardous area classification/regulation

- Integrating new control systems into existing platform systems (brown-field modification)

- Master in MS Office (MS Word, Excel, Outlook, etc…), email and the internet.

- Basic in Autocad 2D.

- Familiar with other instrument specialized programs such as Intool (Smart Plant Tool), Instrucal, etc.

Instrument Engineer:​

- Having from 3 years experience in relevant positions

*Must be Instrument Engineer in Engineering Company in at least 1 successful projects in FEED/Detailed Design for Offshore Oil &Gas Platform.

*Experience in preparing engineering design, specification, datasheet, procument support and/or recommendations for variety of the following:

- Field Instrumentations, analyzers, etc…

- I/O list preparation

- Material Take Off

- Hazardous area classification/regulation

- Master in MS Office (MS Word, Excel, Outlook, etc…), email and the internet.

- Basic in Autocad 2D.

- Familiar with other instrument specialized programs such as Intool (Smart Plant Tool), Instrucal, etc.

Senior Instrument Designer:

- Having from 5 years experience in relevant positions

- Must be Senior Instrument Designer in Engineering Company in at least 2 successful projects in FEED/Detailed Design for Offshore Oil &Gas Platform.

- Master in MS Office (MS Word, Excel, Outlook, etc…), email and the internet.

- Master skill in Autocad 2D.

- Master skill in 3D Modelling (i.e PDMS, E3D, Naviswork).

Experience in preparing engineering design, specification and/or recommendations for variety of the following:

- Installation Specifications

- Bulk material specifications.

- Material Take Off (MTO) for bulk material.

- 3D Modelling (i.e PDMS, E3D)

- 3D Model Review workshop.

- Cable block, wiring, schedule, layout, routing, support detail, hook-up, etc."

Instrument/Telecom Designer:

- Having from 3 years experience in relevant positions

-Must be Instrument/Telecom Designer in Engineering Company in at least 1 successful project in FEED/Detailed Design for Offshore Oil &Gas Platform.

- Master in MS Office (MS Word, Excel, Outlook, etc.), email and the internet.

- Master skill in Autocad 2D.

- Basis skill in 3D Modelling (i.e., PDMS, E3D, Naviswork)

Experience in preparing engineering design and/or recommendations for variety of the following:

- Material Take Off (MTO) for bulk material.

- 3D Modelling (i.e PDMS, E3D).

- Cable block, wiring, schedule, layout, routing, support detail, hook-up, etc."

Telecom Engineer

- Having from 3 years experience in relevant positions

Must be Telecom Engineer in Engineering Company in at least 1 successful projects in FEED/Detailed Design for Offshore Oil &Gas Platform.

Experience in preparing engineering design, specification, datasheet, procument support and/or recommendations for variety of the following:

- PA/GA, Telecoms, Radio Systems, and Data Communication network

- Familiar with telecom specialized programs such as Path Loss V4, CADNA, etc…

- Material Take Off

- Hazardous area classification/regulation

- Master in MS Office (MS Word, Excel, Outlook, etc…), email and the internet.

- Basic in Autocad 2D.

Senior Static Engineer

- At least Bachelor’s degree in Mechanical engineering from a Vietnamese or International university. Major in Oil & Gas Engineering is highly desired.

- At least 05 years of experience in Oil & Gas Engineering as a Senior/ Lead Mechanical Engineer in Oil & Gas Engineering Company.

- Good performance in FEED, Detail engineering project as Mechanical principal engineer.

- Have experience in FEED and Detail engineering project for various type of Mechanical package i.e. rotating machineries, Static equipment, process equipment…

- Proficiency in Mechanical engineering problem solving.

- Has basis knowledge about international standards relevant to Mechanical and Oil & Gas Engineering such as ISO, API, ASME.

Mechanical Engineer

- At least Bachelor’s degree in Mechanical engineering from a Vietnamese or International university. Major in Oil & Gas Engineering is highly desired.

- At least 03 years of experience in Oil & Gas Engineering as a Mechanical Engineer in Oil & Gas Engineering Company.

- Good basis knowledge in Mechanical equipment that shall be designed / fabricated in Offshore Platform or Onshore Refinery.

- Have basis experience in Detail engineering project for various type of Mechanical package i.e. Rotating Equipment, Static Equipment and Full Process Package.

- Proficiency in Mechanical engineering problem solving.

- Has basis knowledge about international standards relevant to Mechanical and Oil & Gas Engineering such as ISO, API, ASME.

HVAC Designer

- Has at least 03 years of experience in Oil & Gas Engineering as a HVAC Designer in Oil & Gas Engineering Company.

- Has understanding of HVAC section in oil & gas field.

- Has the thorough knowledge and the applying ability of the company’s organizing and producing procedures.

- Has professional working attitude and requiring mind.

- Seize regulations and rules of the Company, the Corporation, the Group and the Vietnamese Government laws.

Information related to jobs:

Salary: Open

Working time: Mon - Sat ( 7h - 11h30, 13h30 - 17h00)

Vung Tau Office/ HCM Office (depending on the arrangement)